This is an old revision of the document!



Laser Micromachining Project
McMaster Biophotonics Research Group
McMaster University


Participants
Liam Ward: wardw1@mcmaster.ca
Jacob Saunders: saundj1@mcmaster.ca
Qiyin Fang: qfang@mcmaster.ca
Harold Haugen: haugenh@mcmaster.ca

Description (Summer 2020)


The current goals of the project include: designing and implementing a control system to update the current outdated control system. The new control system will provide a user-friendly GUI to run on a Windows(7+) Operating System. This GUI will send commands to an Arduino-based hardware interface to control various hardware devices.

Important Links

Files

FileDescription
micromachining_manual_20101206.pdf MICROMACHINING MANUAL_20101206
micromachining_experimental_setup_connections.pdf MICROMACHINING EXPERIMENTAL SETUP CONNECTIONS

Progress / Updates

This section is meant to describe how the control system is to be implemented and provide a section to document updates.





Updates

DateUpdate DescriptionAssociated Files
6-10-2020 Created high-level control system
for translation stages:{x,y,z}
See image 'Translation Stage Only Diagram' below
6-10-2020 Created preliminary high-level control system
for entire system (not finished yet)
See image 'Control System Diagram' below

Translation Stage Only Diagram



Control System Diagram

The Control System diagram can be viewed at this link: Control System Link'


Navigation
Personal Tools