Differences

This shows you the differences between the selected revision and the current version of the page.

public:research:shape-2021 2021/06/26 00:56 public:research:shape-2021 2021/06/26 01:22 current
Line 69: Line 69:
The primary devices to be installed in the home are : \\ The primary devices to be installed in the home are : \\
A) The Sensor Stations  \\ A) The Sensor Stations  \\
 +{{ :public:research:shape_fig_10.jpg?250|Sensor Station connected to Outlet (Left), CAD Model of Sensor Station (Right)}}
Figure: Sensor Station connected to Outlet (Left), CAD Model of Sensor Station (Right) Figure: Sensor Station connected to Outlet (Left), CAD Model of Sensor Station (Right)
Each home will contain one sensor station per room used for tracking. The sensor stations will be connected to a wall outlet within these rooms. No other setup is required! We have done our best to ensure this is a smooth process. The sensors used on these stations are labelled in the diagram above and record certain environmental parameters. The ultrasonic and motion sensors detect if someone is near the box, light and temperature sensors measure the room’s condition and the RGB LED is used as an indicator for the box’s performance. Each home will contain one sensor station per room used for tracking. The sensor stations will be connected to a wall outlet within these rooms. No other setup is required! We have done our best to ensure this is a smooth process. The sensors used on these stations are labelled in the diagram above and record certain environmental parameters. The ultrasonic and motion sensors detect if someone is near the box, light and temperature sensors measure the room’s condition and the RGB LED is used as an indicator for the box’s performance.
 +\\ \\
B) The Smartwatch \\ B) The Smartwatch \\
 +{{ :public:research:shape_fig_8.jpg?250|}}
The Ticwatch S2 will be used in this clinical trial. This watch is an Android-based Google smartwatch. You will still be able to see the time of course! So, this essentially functions as a normal watch that you should wear regularly and charge at night and put back on in the morning. If the app closes you will need to swipe down with your finger on the watch's touch screen to find an app called MacM3Wear. Then you touch the icon beside it and the app will begin. If the device is charged regularly the watch will not die and the app will run continuously! But we understand that things happen so just contact us if the watch powers off and you are having trouble restarting the application. The Ticwatch S2 will be used in this clinical trial. This watch is an Android-based Google smartwatch. You will still be able to see the time of course! So, this essentially functions as a normal watch that you should wear regularly and charge at night and put back on in the morning. If the app closes you will need to swipe down with your finger on the watch's touch screen to find an app called MacM3Wear. Then you touch the icon beside it and the app will begin. If the device is charged regularly the watch will not die and the app will run continuously! But we understand that things happen so just contact us if the watch powers off and you are having trouble restarting the application.
 +\\ \\
C) Master Station with Raspberry Pi, ESP32 and Ethernet Cord \\ C) Master Station with Raspberry Pi, ESP32 and Ethernet Cord \\
 +{{ :public:research:shape_fig_9.jpg?200|}}
One of the sensor stations will have an ethernet cable coming out the front of it. This box will be labelled as the master station. The ethernet cable needs to be plugged into your router, as shown in the left-hand side image, so the system can have access to the internet. This box is unique in that it contains a Raspberry Pi device with internet access through the ethernet cord along with a master ESP32 that receives data from each sensor station. One of the sensor stations will have an ethernet cable coming out the front of it. This box will be labelled as the master station. The ethernet cable needs to be plugged into your router, as shown in the left-hand side image, so the system can have access to the internet. This box is unique in that it contains a Raspberry Pi device with internet access through the ethernet cord along with a master ESP32 that receives data from each sensor station.
 +\\ \\

Navigation
Personal Tools