Differences

This shows you the differences between the selected revision and the current version of the page.

public:ccsip:jamal_deen 2010/03/31 14:54 public:ccsip:jamal_deen 2010/03/31 15:26 current
Line 1: Line 1:
-==== Name and Address==== 
-** +=====Dr. M. Jamal Deen===== 
-//M. Jamal Deen//** PhD  FRSC  FCAE  FAPS  FIEEE +{{  :public:ccsip:dean_1.jpg?300x400}}\\ 
-Professor,\\ Senior Canada Research Chair in Information Technology+ 
 +**PhD  FRSC  FCAE  FAPS  FIEEE Professor 
 +\\ Senior Canada Research Chair in Information Technology
Electrical  and Computer Engineering, McMaster University \\ Electrical  and Computer Engineering, McMaster University \\
 +
1280 Main St. West, Hamilton, Ontario L8S 4K1, CANADA \\ 1280 Main St. West, Hamilton, Ontario L8S 4K1, CANADA \\
Tel: 905 525 9140, ext. 27137; Fax: 905 523 4407 \\ Tel: 905 525 9140, ext. 27137; Fax: 905 523 4407 \\
-E-mail: jamal@mcmaster.ca; Web: http://www.ece.mcmaster.ca/~jamal/+E-mail: jamal@mcmaster.ca; Web: http://www.ece.mcmaster.ca/~jamal/**
\\ \\
 +
\\ \\
=== Research Interests === === Research Interests ===
Line 29: Line 32:
\\ \\
===== Sample Bio-imaging Research Project ===== ===== Sample Bio-imaging Research Project =====
-\\ 
**High-speed, High-sensitivity Silicon-Based Photodetection Systems for Biomedical Applications** \\ **High-speed, High-sensitivity Silicon-Based Photodetection Systems for Biomedical Applications** \\
\\ \\
 +{{  :public:ccsip:dean_2.jpg?400x300}}
 +\\
 +
Fluorescent and auto-fluorescence spectroscopic imaging are important techniques that can be used to provide information on the functional properties of tissues and can also serve as a useful diagnostic indicator. In auto-fluorescence spectroscopy, the detected spectrum can be used to diagnose the affected tissue, as it has a different spectrum than a normal tissue. Recording the intensity of the response of a sample tissue in both time and wavelength domains show that the peak of the fluorescence response decays with time. This leads to the idea of using this time domain response, instead of only the spectrum, to diagnose the tissue is preferable.\\ Fluorescent and auto-fluorescence spectroscopic imaging are important techniques that can be used to provide information on the functional properties of tissues and can also serve as a useful diagnostic indicator. In auto-fluorescence spectroscopy, the detected spectrum can be used to diagnose the affected tissue, as it has a different spectrum than a normal tissue. Recording the intensity of the response of a sample tissue in both time and wavelength domains show that the peak of the fluorescence response decays with time. This leads to the idea of using this time domain response, instead of only the spectrum, to diagnose the tissue is preferable.\\
 +{{:public:ccsip:dean_3.jpg?400x250}}
 +
 +
 +{{  :public:ccsip:dean_4.jpg?300x300}}
\\ \\
In this research, an imaging system used to capture the time and wavelength domain responses of auto-fluorescence signals is being developed. First, similar to commercial spectroscopy systems, our system will be very sensitive and capable of detecting very low levels of light with acceptable signal-to-noise ratios. Our imaging system will have a time-domain resolution to be able to capture light with ns time resolution due to the fast detector response time. Also, the imaging system will be sensitive at the wavelengths of interest for functional imaging. In addition, we are also researching novel avalanche photodiodes operating as single-photon detectors, and that can been designed in a standard CMOS technology. We have already demonstrated the viability of some designs. At the circuit level, the peripheral circuits (quench and reset switches, active quench, monostable, gating) needed for the high-performance operation of the avalanche photodiodes are being improved to provide ns time resolution. This will allow us to develop small, portable and low-cost high-speed, high sensitivity imaging systems for biomedical applications. In this research, an imaging system used to capture the time and wavelength domain responses of auto-fluorescence signals is being developed. First, similar to commercial spectroscopy systems, our system will be very sensitive and capable of detecting very low levels of light with acceptable signal-to-noise ratios. Our imaging system will have a time-domain resolution to be able to capture light with ns time resolution due to the fast detector response time. Also, the imaging system will be sensitive at the wavelengths of interest for functional imaging. In addition, we are also researching novel avalanche photodiodes operating as single-photon detectors, and that can been designed in a standard CMOS technology. We have already demonstrated the viability of some designs. At the circuit level, the peripheral circuits (quench and reset switches, active quench, monostable, gating) needed for the high-performance operation of the avalanche photodiodes are being improved to provide ns time resolution. This will allow us to develop small, portable and low-cost high-speed, high sensitivity imaging systems for biomedical applications.
 +

Navigation
Personal Tools