Differences

This shows you the differences between the selected revision and the current version of the page.

group2:final_product_description 2008/12/09 15:56 group2:final_product_description 2008/12/09 16:03 current
Line 51: Line 51:
The mounting system for the lens is described in the Optical Proof-of-Principle section. The final version was reinforced with duct tape, and screwed onto the base of the instrument in the correct location. Once the lens was in place it was crucial to touch it as little as possible to avoid unnecessary translations. Figure 7 shows the lens with respect to the slit and the prism. The mounting system for the lens is described in the Optical Proof-of-Principle section. The final version was reinforced with duct tape, and screwed onto the base of the instrument in the correct location. Once the lens was in place it was crucial to touch it as little as possible to avoid unnecessary translations. Figure 7 shows the lens with respect to the slit and the prism.
 +
 +{{:group2:lens.jpg|}}
 +
Line 58: Line 61:
The schematic of the final design is shown in Figure 8. The schematic of the final design is shown in Figure 8.
 +
 +{{:group2:physical_set_up.jpg|}}
 +
Line 75: Line 81:
The final version of the spectrometer is shown in Figure 9. The whole spectrometer enclosure can be covered by a piece of cardboard to prevent ambient light from entering. The final version of the spectrometer is shown in Figure 9. The whole spectrometer enclosure can be covered by a piece of cardboard to prevent ambient light from entering.
 +
 +{{:group2:final_spectrometer.jpg|}}
-Figure 9: Final Spectrometer Construction+**Figure 9: Final Spectrometer Construction**

Personal Tools