This is an old revision of the document!



Laser Micromachining Project
McMaster Biophotonics Research Group
McMaster University


Participants
Liam Ward: wardw1@mcmaster.ca
Jacob Saunders: saundj1@mcmaster.ca
Qiyin Fang: qfang@mcmaster.ca
Harold Haugen: haugenh@mcmaster.ca

Description (Summer 2020)


The current goals of the project include: designing and implementing a control system to update the current outdated control system. The new control system will provide a user-friendly GUI to run on a Windows(7+) Operating System. This GUI will send commands to an Arduino-based hardware interface to control various hardware devices. ==== Important Links ==== —- ^Link^Description^ |https://github.com/liamward14/Laser-Micromachining-GUI | Current Github Repo | |https://liamward14.github.io/Laser-Micromachining-GUI/ | Published Github Project Site | —- ==== Files ==== ^File^Description^ |micromachining_manual_20101206.pdf | MICROMACHINING MANUAL_20101206 | |micromachining_experimental_setup_connections.pdf | MICROMACHINING EXPERIMENTAL SETUP CONNECTIONS | —- ==== Progress / Updates ==== <box round green left 60%> This section is meant to describe how the control system is to be implemented and provide a section to document updates. </box>



==== Updates ==== ^Date^Update Description^Associated Files^ |6-10-2020 | Created high-level control system
for translation stages:{x,y,z}|See image 'Translation Stage Only Diagram' below | |6-10-2020 | Created preliminary high-level control system
for entire system (not finished yet)|See image 'Control System Diagram' below | Translation Stage Only Diagram



Control System Diagram
The actual image is too big for this page, so I have included a link to an HTML version: Control System